Northants Tools
Larsen Brush-Joint 360 Brush In Patio Grout 15kg
Larsen Brush-Joint 360 Brush In Patio Grout 15kg
Larsen Brush-Joint 360 Brush In Patio Grout 15kg
FREE UK Delivery On orders over £299net*
Need some help? Call us on 01604 439300

Larsen Brush-Joint 360 Brush In Patio Grout 15kg

Ready-To-Use

High Quality

Walk On In 24 Hours

Joint Widths: 3 - 20mm

Joint Depth: Minimum Depth Of 20mm

Coverage: 15m² Per Tub*

Size: 15kg Tub

Option Product Code Price Quantity
Black K360BL15

£45.00 INC VAT

£37.50 EX VAT

Grey K360G15

£45.00 INC VAT

£37.50 EX VAT

Buff K360BU15

£45.00 INC VAT

£37.50 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Northants Tools Ltd can't be held responsible for any under ordering.

Description

Larsen Brush-Joint 360 is a ready-to-use, high-quality, brush-in jointing product for all types of paving. Its advanced, permeable formulation is suitable for use all year round. Brush-Joint 360 is ideal for use with concrete, natural stone and porcelain paving.

Brush-Joint 360 is suitable for use with most paving materials in foot trafc areas. All paving must be sufciently stable and rigid so as to not move under load. Paving must be installed on a full, semi-permeable, free-draining mortar bed. A typical example is a 6:1 mortar made with clean sharp sand (or pea gravel) and cement and enough water to ensure that the bedding mix just holds together in a ball when squeezed gently in a clenched (gloved) hand. When installing new paving, ensure the narrowest part of the joint is not less than 3 mm wide. Some paving materials may be prone to staining. Always test an inconspicuous area rst. To avoid any potential, temporary staining thoroughly pre-soak the area before application.

Attachments
Larsen Brush Joint-360 Technical Data Seet.pdf
Larsen Brush Joint-360 Safety Data Sheet.pdf
Specification

Colours: Black, Grey & Buff.
Joint Widths: 3 - 20mm.
Joint Depth: Minimum depth of 20mm is recommended ( Deeper joints will take longer to cure )
Application Temperature: 5 - 30°C.
Curing Time: 24 - 48 hours ( Depending on site conditions ) Lower temperatures and damper conditions may lengthen curing time.
Coverage: 15m² Per tub based on 600 x 600mm slabs with 20mm deep 10mm wide joints.
Storage & Shelf Life: Store in sealed containers in dry conditions, protected from extremes of temperature. Part used containers – add enough water to cover the surface by about 50mm. Pour-off excess water before re-use and blend with any new product opened to avoid colour variations. Up to 2 years shelf life in unopened manufacturer’s packaging.