Laticrete 335 RAPID Flexible Rapid Set C2 S1 Tile Adhesive Grey 20kg
Flexible Cement- And Polymer-Based Adhesive
Fast Setting
Can Be Used On Floors & Walls
Suitable For Internal & External Applications
Certification: EN 12004:2017: C2 FT S1
For Thicknesses Up To 15mm
Colour: Grey
Coverage: 3 - 6 kg/m² With A 8 x 10mm Notched Trowel
Bag Size: 20kg
| Product Code | Price | Quantity |
|---|---|---|
| 28-0335-E-0200-21-4 |
£14.39 inc VAT
£11.99
ex VAT
|
|
Work out how much you need
Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.
This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Northants Tools Ltd can't be held responsible for any under ordering.
Description
335 RAPID is a flexible cement- and polymer-based adhesive with a soft, creamy consistency. It is a fast-setting adhesive for thin and medium-bed installations, for thicknesses up to 15 mm. It is ideal for projects with tight deadlines, as it can be ready for grouting on the same day as the adhesive is applied.
Applications:
• For indoor and outdoor installations of porcelain stoneware, thin ceramic slabs, non-absorbent single-fired tiles, double-fired tiles, natural and reconstituted stones resistant to moisture, including large-format tiles and glass mosaics.
• For walls or floors
• For installation over existing tiles
• For installation on underfloor heating screeds
• For high-traffic areas
• For thin-bed and medium-bed installations, for thicknesses up to 15 mm
• For installations with tight deadlines
• For the installation of large-format tiles
• Installation of wall coverings subject to constant immersion, such as swimming pools or baths
Suitable substrates:
• Concrete
• Concrete blocks
• Screeds
• Cement plaster
• Flexible cement- and polymer-based waterproofing products (AQUA BARRIER and HYDROBAN ranges)
• Old tiles and stone
• Fibre cement board
• Exterior timber panels (Interior use only)
• OSB panels (Interior use only)
• Plasterboard (For internal use only, in dry environments)
• Gypsum mortars and screeds (Interior use only)*
*Treat beforehand with Primer Plus and Primer Superior.
Specification
Basis: Cement, aggregates, additives.
Colour: Grey.
Apparent Density: 1,2 g/dm³.
Maximum Grain Size: ~ 0,5 mm.
Flammability: No.
Classification EN 12004-1: C2 FT S1.
Consistency: Creamy.
Wet Density: 1,60 kg/dm³.
Mix Ratio: 26 - 28% (5.2 - 5.6L water per 20kg bag)
Application Temperature: From + 5°C to + 35°C.
Working Time: 30 - 45 minutes.
Open Time: 10 - 20 minutes.
Maximum Thickness: 15mm.
Time to Foot Traffic: 3 hours.
Time to Grouting: 3 hours.
Time to Full-Service Conditions: 3 days.
Final Hardening: 7 days.
Approximate Coverage / Consumption:
• 3–6 kg/m² with an 8x10 mm notched trowel.
• 5–7 kg/m² with a 10x15 mm notched trowel.
Shelf Life: Factory-sealed bags of this product are guaranteed to be of first quality for twelve (12) months if stored in a cool, dry place.