by Lithofin
For Ceramic & Quarry Tiles
Long-Term Effect
Ready-To-Use Special Impregnator
Protects Against Stains
Size: 1L Bottle
| Product Code | Price | Quantity |
|---|---|---|
| KST1 |
£42.01 INC VAT £35.01 EX VAT |
|
Lithofin KF Stain-Stop for ceramic and quarry tiles (KF). This ready-to-use special impregnator is solvent based and contains high-quality water and oil-resistant components.
Lithofin KF Stain-Stop penetrates into the surface and coats the capillaries with an extremely thin, invisible film. Oil, grease and water are not absorbed by the surface but instead remain on the surface. During this time, dirt can easily be removed without leaving stains.
The effectiveness depends on the amount of product absorbed by the surface. The characteristic appearance of the surface material is not or only slightly altered.
For protecting unglazed ceramics against stains and for facilitating everyday maintenance. Highly recommended for use in kitchens, bathrooms and other areas which may come into contact with water and oil.
Please Note: Lithofin KF Stain-Stop does not or only slightly affect the slip resistance properties of the surface.
Application Temperature: the temperature of the surface should be between 5°C - 25°C. Switch off under-floor heating.
Drying Time: most solvents will evaporate within two hours. The product will be fully effective after approx. 48 hours.
Coverage Estimates: (Depends on the absorbency of the material)
- Clay Slabs: 3 to 8m²/L
- Unglazed Quarry Tiles: 8 to 15m²/L
Storage & Shelf Life: Keep closed, cool and dry. Shelf life of up to 3 years. Open containers should be used quickly.
Size: 1L Bottle
£12.60 INC VAT
£10.50 EX VAT
£14.82 INC VAT
£12.35 EX VAT
£12.35 INC VAT
£10.29 EX VAT
£17.29 INC VAT
£14.41 EX VAT
£30.88 INC VAT
£25.73 EX VAT
£17.40 INC VAT
£14.50 EX VAT
