by Mapei
Half Pallet 25 x 20kg Bags
Rapid Setting
For Interior & Exterior Use
Suitable For Use With Underfloor Heating
Grout After 2 Hours
Certification: C2FT S1
Coverage: 2 - 6kg/m²*
Colour: White
Bag Size: 20kg
| Product Code | Price | Quantity |
|---|---|---|
| 012520 (Half Pallet) |
£689.70 INC VAT £574.75 EX VAT |
|
Half Pallet 25 x 20kg Bags
Keraquick S1 Zero is a powder composed of a blend of special cements, selectively graded aggregates, synthetic resins and accelerators, which develop high bond strength 2-3 hours after mixing. These properties allow floors and walls tiled using Keraquick S1 Zero to be grouted after only 2 hours. Floors can also be subjected to light foot traffic after 2 hours and full service conditions after 24 hours. Where floors are to be subjected to heavy-duty use, such as cherry pickers, the floor tiling should have been allowed to cure for a minimum of 7 days.
For the interior and exterior installation of ceramic and porcelain tiles, mosaics and natural stone not sensitive to moisture. For floors and walls with no vertical slip and very low emissions of VOC.
Where To Use:
Bonding to cement-based and suitably prepared calcium sulphate-based screeds, concrete, plywood overlaid floors, existing unglazed ceramic floor tiles, cement-based renders, gypsum plaster, plasterboard, tilebacker boards.
▪ For interior and exterior use.
▪ For the installation of ceramic and porcelain tiles and mosaics. For natural stone not sensitive to moisture.
▪ Suitable for the installation of glass tiles and mosaics. Mix with Latex Plus where the glass has a coating on the rear.
▪ For the installation of insulating materials such as expanded and extruded polystyrene panels, gypsum boards, glass and rockwool, Eraclit®, aerated concrete blocks, sound deadening panels.
Type: Powder
Colour: White
Bulk density (kg/m): 1200 (White)
Dry solids content (%): 100
EMICODE: EC1 Plus - very low emission
APPLICATION DATA (at +23C - 50% R.H.)
Mixing ratio: 100 parts of powder with 24-26 parts by weight of water
Consistency of mix: creamy paste
Density of mix (kg/m): 1500
pH of mix: approx. 11
Pot life: 30 minutes
Application temperature range: from +5°C to +30°C
Open time (according to EN 1346): 15-20 minutes
Grouting joints: 2-3 hours
Set to light foot traffic: 2-3 hours
Ready for use: 24 hours (3 days for water features and swimming pools)
Storage & Shelf Life: 12 months when stored off the ground in the original unopened packaging, protected from high humidity. Prolonged storage at extremes of temperature (low or high) and exposure to damp or humid conditions may extend the setting time of Keraquick S1 Zero.
£27.59 INC VAT
£22.99 EX VAT
£1324.22 INC VAT
£1103.52 EX VAT
