Mapei Latexplan Trade Two Part Smoothing Self Levelling Compound 25kg
by Mapei
Very Low Odour
Walkable After: 1 - 2 Hours
Depth: 3 - 10mm
Working Time: 30 mins
Floor Coverings After: 12 hours
Coverage: 6m² @ 3mm thickness
Size: 25kg Bag & 5kg Bottle
| Product Code | Price | Quantity |
|---|---|---|
| 237330 + 237730 |
£21.59 inc VAT
£17.99
ex VAT
|
|
Work out how much you need
Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.
This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Northants Tools Ltd can't be held responsible for any under ordering.
Description
Latexplan Trade is used for levelling and smoothing differences in thicknesses of 3 to 10 mm (in one application) on new and existing substrates, to prepare them for any type of flooring installation. Latexplan Trade is suitable for areas subject to chairs with castors.
Some application examples:
Smoothing concrete floors, cement-based screeds, Mapecem and Topcem screeds. Smoothing existing flooring in concrete, terrazzo, ceramic tile, and natural stone.
Latexplan Trade is a two-part smoothing compound that consists of a grey powder (part A) containing special cements, graded silica sands and additives to be mixed with a synthetic rubber latex (part B).
Latexplan Trade can be walked on after approximately 1-2 hours and is ready for installing flooring after about 12 hours, depending on the thickness and the ambient temperature. Latexplan Trade has a very low odour and this makes it suitable for use in confined and inhabited areas, where working and/or occupation must be maintained.
Suitable for use under a damp-proof membrane such as Mapeproof ESM, where residual or static moisture is present. For the best results, Latexplan Trade should be mixed without extra latex or water being added.
Features:
Suitable for underfloor heating.
Suitable for use under MAPEPROOF 1K TURBO & MAPEPROOF ESM surface membranes.
Consumption: Approx. 6m² at 3mm thickness.
Application: Smooth-edged trowel or spiked roller.
Very Low Odour.
Walkable After 1 - 2 Hours.
Depth: 3 - 10mm.
Working Time: 30 mins.
Floor Coverings After: 12 hours.
Specification
PART A (25kg Bag):
Consistency: Fine powder
Colour: Cement Grey
Dry Solids Content (%): 100
Bulk Density (kg/m³): 1400
Flammable: no
PART B:
Consistency: Runny liquid
Colour: White
Dry Solids Content (%): 9
Bulk Density (kg/m³): 1.05
Flammable: No
Emicode: EC1 Plus - Very low emission
Mixing ratio: 5 kg of Latexplan Trade liquid with 25 kg of Latexplan Trade powder
Thickness Per Coat: 3 mm to 10 mm
Density Of Mix (kg/m³): 2000
Application Temperature Range (°C): from +5°C to +35°C
Workability (at +23°C): 20 - 30 minutes
Setting Time: 45 - 60 minutes
Set To Light Foot Traffic: after 1½ - 2 hours
Time Before Laying Floorcovering: 12 hours
Compressive strength (N/mm ):
- After 1 day: 7
- After 7 days: 20
- After 28 days: 26
Flextural strength (N/mm ):
- After 1 day: 3
- After 7 days: 6
- After 28 days: 8
Resistance to abrasion after 28 days: 3g
