Mapei Ultraplan Eco 3215 ZERO Ultra-Fast Hardening Self-Levelling Compound 20kg
by Mapei
High Compressive And Flexural Strength, With High Resistance To Loads
Can Be Pump Applied
CO2 Fully Offset Product
For Interior Use Only
Compatible With Underfloor Heating
Suitable Thicknesses: 3 - 15mm
Coverage: 4.5m² At 3mm Thickness Per 20kg Bag
Bag Size: 20kg
| Product Code | Price | Quantity |
|---|---|---|
| 1495720 |
£20.39 inc VAT
£16.99
ex VAT
|
|
Work out how much you need
Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.
This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Northants Tools Ltd can't be held responsible for any under ordering.
Description
Ultraplan Eco 3215 Zero is a grey powder consisting of special cements with rapid setting and hydration together with graded silica sand, resins and special additives, according to a formula developed in the MAPEI Research and Development Laboratories. Mixed with water, Ultraplan Eco 3215 Zero becomes a highly fluid and easily workable mortar, which is self-levelling, with high adhesion to the substrate and dries ultra-quickly. Ultraplan Eco 3215 Zero can be applied with an automatic pressure pump for distances over 100 m. Ultraplan Eco 3215Zero can be spread in thicknesses up to 15 mm per coat without shrinkage, cracking or crazing, and develops very high compressive and flexural strength, as well as resistance to indentation and abrasion. Ultraplan Eco 3215 Zero is ready to receive flooring after approximately 12 hours, regardless of the thickness. It is recommended to wait 24 hours before installing wooden flooring.
Ultraplan Eco 3215 Zero is part of the CO Fully Offset in the Entire Life Cycle line of products. CO emissions measured throughout the life cycle of products from the Zero line in 2025 using Life Cycle Assessment (LCA) methodology, verified and certified with EPDs, have been offset through the acquisition of certified carbon credits in support of forestry protection projects. A commitment to the planet, to people and to biodiversity. For more details on how emissions are calculated and on climate mitigation projects financed through certified carbon credits, visit the webpage zero.mapei.com.
Where To Use:
• Ultraplan Eco 3215 Zero is used for interior levelling and removing differences in thickness from 3 to 15 mm of new or existing substrates, preparing them to receive any kind of flooring where excellent resistance to loads and traffic is needed.
• Ultraplan Eco 3215 Zero is particularly suitable for areas subject to wheeled traffic.
• Ultraplan Eco 3215 Zero is for interior use only.
• Ultraplan Eco 3215 Zero is suitable for screeds incorporating under-floor heating systems and can be used as a self-leveller over electrical under-floor heating systems.
Specification
Consistency: Fine powder.
Colour: Grey.
Bulk density (kg/m³): 1,300.
Dry solids content (%): 100.
EMICODE: EC1 Plus – Very low emission.
Mixing ratio: 4.8 to 5 litres of water per 20 kg bag.
Thickness per coat: 3 mm to 15 mm.
Self-levelling: Yes.
Density of mix (kg/m³): 2,000.
pH of mix: approx. 12.
Application temperature range: from +5°C to +30°C.
Open time: 20 - 30 minutes.
Setting time: 45 - 60 minutes.
Set to light foot traffic: 3 hours.
Time before laying flooring: 12 hours (24 hours for wood flooring).
Coverage: 4.5m² At 3mm Thickness Per 20kg Bag.
Bag Size: 20kg.
Storage & Shelf Life: Ultraplan Eco 3215 Zero stored in a dry place is stable for at least 12 months. However, with time, it could undergo a slower setting time, but the final characteristics do not alter.
