Ultra Tile Fix ProLevel Fibre Reinforced Flexible Self Levelling Compound 20kg

UltraTile ProLevel Fibre is a single-part, high-strength, rapid-drying and curing concrete floor leveller. The product’s formulation incorporates a blend of specially graded fillers, cements, polymers and fibres. Our specially formulated fibre technology aids application and strength, resulting in a strong, sound and even base ready to commence the tiling process after only 8 hours.

Surface Preparation:
All subfloors should be protected from moisture from the sub-ground by use of a base damp proof membrane (DPM) (please check older properties, which may not have a base DPM and consult UltraTile for advice). Assess moisture levels in accordance with BS 8203, to achieve a hygrometer reading of 75%RH or less. Where this is not attained a surface DPM should be used – the selection of which will be subject to the subfloor (please seek advice from UltraTile). Any surface laitance, adhesive residue, paints, weak smoothing underlayment, and any other materials which will hinder UltraTile ProLevel Fibre's bond with the subfloor should be mechanically removed. The subfloor should be clean, dry and sound. The area should also be dust-free prior to any primer application.

Suitable Surfaces & Substrates:
Concrete subfloors, Tamped or pan floated concrete, Sand/cement screeds, Existing smoothing underlayment, Terrazzo/granolithic ceramic tiles, Anhydrite/calcium sulphate/gypsum based screeds, Plywood/tile backer board, Warm water underfloor heating, Radiant electrical underfloor heating system, UltraFloor DPM IT.