Mapei Keraquick Easy S1 Rapid Setting High Performance Adhesive White 20kg

Order in the next {{data.days}} day, {{data.hours}} hour, {{data.minutes}} minute and {{data.seconds}} second Last chance for {{data.day}} delivery*

FREE UK Delivery On orders over £250net*

Need some help? Call us on 01604 439300

Mapei Keraquick Easy S1 Rapid Setting High Performance Adhesive White 20kg

by Mapei

For The Installation Of Ceramic, Porcelain, Stone Tiles & Mosaics

S1 Flexible

Suitable For Interior & Exterior Use

Set to Light Foot Traffic In 2 3 Hours

Pot Life: 30 Minutes

Colour: White

Size: 20kg Bag

Coverage: Between 2 - 5kg Per m2 Depending On Tile Size

Product Code	Price	Quantity
123720	£18.60 INC VAT £15.50 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Northants Tools Ltd can't be held responsible for any under ordering.

Description

Rapid setting, high performance, S1 flexible cementitious adhesive for the installation of ceramic, porcelain and stone tiles and mosaics to floors

Keraquick Easy S1 is a Cementitious (C) Improved (2), Fast Setting (F) Deformable (S1) tile adhesive classified as C2F S1.

Where To Use:
For interior and exterior installations of ceramic, porcelain and moisture-stable natural stone tiles and mosaics to cement-based and suitably prepared calcium sulphate-based screeds, concrete, plywood overlaid floors, existing unglazed ceramic floor tiles, tile backer boards.

Some Application Examples:
Renovation in heavily trafficked areas and where surfaces need to be quickly back in service, such as public buildings, motorway services, pedestrian walkways, supermarkets, showrooms, airports etc.
Rapid installation or renovation in swimming pools, industrial plants (breweries, wine cellars, dairies etc.), and refrigeration units.
Rapid installation in bathrooms, showers, kitchens, conservatories and on balconies and terraces.
The installation of tiled finishes to underfloor and under-tile heating systems.
The installation of non-absorbent floor tiles over existing floors, where a standard setting adhesive would be too slow.
The installation of large format tiles due to the product's excellent wetting-out capabilities.
The installation of ceramic and porcelain tiles directly over under tile heating cables.
The installation of tiles externally in autumn/winter when nighttime temperatures drop below +5C.

Attachments

Mapei Keraquick Easy S1 Technical Data Sheet.pdf
Mapei Keraquick Easy S1 WHITE Safety Data Sheet.pdf

Specification

Type: Powder
Colour: White.
Bulk Density(Kg/m ): 1400.
Dry Solids Content (%): 100.
Mixing Ratio: 100 Parts of Powder With 24-26 Parts by Weight of Water.
Consistency of Mix: Creamy Paste.
Density of Mix (Kg/m ): 1500.
Ph of Mix: Approx. 11.
Pot Life: 30 Minutes.
Application Temperature Range: From +5c to +30c.
Open Time (According to en 1346): 15 20 Minutes.
Grouting Joints: 2 3 Hours.
Set to Light Foot Traffic: 2 3 Hours.
Ready for Use: 24 Hours (3 Days for Water Features and Swimming Pools).
Tensile Adhesion Strength According to en 1348 (N/mm):
- Initial (After 28 Days): 2.0.
- After Heat Ageing: 1.80.
- After Water Immersion: 1.0.
- After Freeze-thaw Cycles: 1.0.
Resistance to Acids: Fair.
Resistance to Alkali: Excellent.
Resistance to Oils: Excellent.
Resistance to Solvents: Excellent.
Temperature When in Use: From -30c to +90c.
Deformability According to en 12004: S1 - Deformable.
Storage & Shelf Life: 12 Months When Stored Off the Ground in the Original Unopened Packaging Protected From High Humidity.

Mapei Keraquick Easy S1 Rapid Setting High Performance Adhesive White 20kg Half Pallet (24 Bags Tail Lift)

£446.40 INC VAT

£372.00 EX VAT

Mapei Keraquick Easy S1 Rapid Setting High Performance Adhesive White 20kg Full Pallet (48 Bags Tail Lift)

£892.80 INC VAT

£744.00 EX VAT