Ultra Scape Flowpoint Fine Slurry Jointing Mortar 20kg

UltraScape flowpoint fine is a rapid-set grout with high fluid consistency for early trafficking that conforms to the strict demands of BS 7533. It is ideal for all paving areas where a rigid or bound void-free joint is required. The product is suitable for application on driveways, patios, town centre pedestrian schemes, pathways and carriageways. UltraScape flowpoint fine can be used with natural stone, concrete flags, Porcelain tiles and clay pavers.

UltraScape flowpoint fine is a fully pre-mixed dry-pack which only requires tile addition of water on-site. It can fill joints from 2mm to 50mm wide with a minimum target depth of 20mm, up to 200mm In one application. This highly fluid grout achieves a final compressive strength of 49.6N/mm’ (results achieved using 3.4 litres of water per 20kg bucket), and will reach its initial set in 30 minutes, will accept light foot traffic after 1 hour, and vehicular traffic after 4 hours (dependent upon temperature).

Available in Natural Grey or Fine Charcoal.