Ultra Scape Flowpoint Fine Slurry Jointing Mortar 20kg Full Pallet (40 Tubs Tail Lift)

by Ultra Scape

Full Pallet 40 x 20kg Tubs

Rapid Setting

Fine Finish

Joint widths: 2 - 50mm

Open to foot traffic: 1 Hour

Sets in 15 mins at 20°C

Choice Of Colour

Size: 20kg Tub

Option	Product Code	Price	Quantity
Fine Charcoal	Flowpoint Fine Char BKT (Full Pallet)	£1032.71 INC VAT £860.59 EX VAT
Natural Grey	Flowpoint Fine Nat BKT (Full Pallet)	£1032.71 INC VAT £860.59 EX VAT

Work out how much you need

Using the calculator below, you can work out how much material you will need to get the job done. Please either enter your required area m2 or the width and length.

This is a rough guide calculation provided in good faith, actual usage may vary, please allow for wastage when placing your order. Northants Tools Ltd can't be held responsible for any under ordering.

Description

Full Pallet 40 x 20kg Tubs

UltraScape flowpoint fine is a rapid-set grout with high fluid consistency for early trafficking that conforms to the strict demands of BS 7533. It is ideal for all paving areas where a rigid or bound void-free joint is required. The product is suitable for application on driveways, patios, town centre pedestrian schemes, pathways and carriageways. UltraScape flowpoint fine can be used with natural stone, concrete flags, Porcelain tiles and clay pavers.

UltraScape flowpoint fine is a fully pre-mixed dry-pack which only requires tile addition of water on-site. It can fill joints from 2mm to 50mm wide with a minimum target depth of 20mm, up to 200mm In one application. This highly fluid grout achieves a final compressive strength of 49.6N/mm’ (results achieved using 3.4 litres of water per 20kg bucket), and will reach its initial set in 30 minutes, will accept light foot traffic after 1 hour, and vehicular traffic after 4 hours (dependent upon temperature).

Available in Natural Grey or Fine Charcoal.

Attachments

FLOWPOINT-FINE-DATASHEET.pdf
FLOWPOINT-FINE-Safety-Sheet.pdf

Specification

Colour: Natural Grey / Fine Charcoal
Unit/packaging: 20kg bucket
Storage: Store in a cool, dry and frost-free area at temperatures between 5°C and 30°C
Yield*: 11.12 litres approx, per 20kg bucket
Workability: 5-15 minutes
Bond (Adhesion strength): >1.5N/mm² after 28 days
Water required: 3.4 litres per 20kg
Compressive strength: 49.6N/mm2 after 38 days
Flexural strength: 7.1N/mm² after 28 days
Tensile strength: 3.91N/mm2 after 28 days
Shelf life: 8 months from the date of manufacture printed on this bucket, unopened in the above conditions. High temperatures and high humidity will reduce shelf life.

Ultra Scape Flowpoint Fine Slurry Jointing Mortar 20kg

From

£26.39 INC VAT

£21.99 EX VAT

Ultra Scape Flowpoint Fine Slurry Jointing Mortar 20kg Half Pallet (20 Tubs Tail Lift)

From

£516.36 INC VAT

£430.30 EX VAT